TIPS:
1.Please try to charge the controller firstly if it can't be used. The indicators will blink when charging and the indicators turn off when it full charged.
2.Four handles can be connected at the same time.
3.If the controller cannot be charged or cannot work, please continuously poke the reset holes of the controller twice to resetting and try again. Because the circuit board will protect the inner core intelligently, it will disconnect automatically. The reset button is on the back of the controller.
4.Connection method with PC:
1)When the handle is turned off, directly insert the TYPE-C data cable, the indicator lights on the handle 2 and 4 will always be on, and the controller on the pc side will display XBOX 360 conrroller.
2)At this time, press and hold "H" for about 3 seconds. The indicator light 2 is always on and automatically enters the PC normal mode.
Reasons for unsuccessful pairing:
1. The time to press the HOME button is too short, please try to hold it longer until the four indicators flash quickly.
2. The controller's power is too low, which prevents the switch from being paired. Please try to charge the controller.
3. When pairing, make sure that the controller is turned off. Then try the pairing operation again.
4. If the customer's switch host stores too much Bluetooth memory, the host and the handle cannot be successfully paired, in this case, you need to clear the Bluetooth memory of the host first.
